Cleaning up the Bottom
The brass angled-strip was glued with epoxy and the corners were soldered together. The bottom had to be sanded with a file so it would look clean if viewed from the bottom. I cannot imagine how anyone would see this unless they are 1 inch tall, but at least I know it's clean.

Click Once To Enlarge
Forming the Boat Deck Structures
Now it was time for the Boat deck Structures. Basic shapes were cut from Plexiglas according to the Pommern Shipyard drawing of the upper deck and glued together in a jig.

Click Once To Enlarge
Fitting the Boat Deck Structures
The positions for the structures were marked onto the deck which allowed me to ensure the structures would be properly aligned on the boat deck.

Click Once To Enlarge
Back to the Pommern Index Page
Aufbau Intro / Lower Deck / Boat Deck / 8,8cm Gun Platforms / Upper Deck / Structures / Platform Supports/ Armoured Bridge / Air Vents / Priming / Crow's Nests / Deck Panels / Final Product